This product has been discontinued.

We have discontinued this product permanently. Please use the navigation at the top of the page to find similar products or call us or use the LiveChat engine available on the site below
Teradek Bolt Pro 1000 3G-SDI / HDMI Video Transceiver Set

Teradek

Part # BOLT965

MFR Part # 10-0965

Medium Range (1,000ft) Video Transceiver Set (Tx with Rx) with dual 3G-SDI and HDMI Video Input. More
MSRP: $5990
$5,990.00

With highly refined software, new wireless radios, and a redesigned chassis, these new models are the most reliable and capable monitoring solutions we have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable, manual frequency selection and USB 3.0 GRAB Engine are all included on these new models but with the following new features:

Longer Range

Transmit visually lossless
video up to 1000ft
with no delay.

20MHz Channels

Use more than twice as many Bolts in one location or avoid interference like never before.

2 New DFS Channels

Operate interference-free
more often in the USA and Europe by making use of two newly introduced DFS channels.

20% Smaller Chassis

Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed.

Individual Identity

Easily identify which Bolt
TX and RX work together with removable colored top plates.

Rapid Reconnection

Reconnect times during a dropped link are now instantaneous once you move back into range.

Built-In HDMI to SDI Converter

Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device.

More Robust
Than Ever Before

Reach your Bolt’s full range
and potential right out of
the box with new software
that provides the most robust wireless link we’ve ever created.

More about Bolt 1000

  • Latency: < 0.001 seconds
  • Range: 1000ft
  • Multicast: Up to 4 Rx
  • Size (TX): 24x66x102mm
  • Weight TX / RX: 238g / 380g
  • Input / Output: 3G-SDI & HDMI
  • Resolution / Frame Rate: 1080p60
  • TX HDMI / SDI Converter: YES
  • Number of 20 MHz DFS Channels: 0
  • Number of 40 MHz DFS Channels*: 11
  • Rapid connect: YES
  • Gen 1 Sidekick Compatible: NO
  • Metadata support: YES
  • USB 3.0 Grab Engine: YES

* Based on USA channels. Channel availability may vary by region.

Technical Specifications

Bolt 1000 Transmitter

Video Input

  • 1 x 75 Ohm BNC
  • 1 x Type A receptacle HDMI

Video Output

  • 1 x 75 Ohm BNC(Loop-out)

Video Delay (Tx to Rx)

  • <0.001sec (when no video format conversion is enabled)

Color Sampling

  • Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later); RGB 4:4:4 (HDMI out, 8-bit color)

Supported Resolutions

  • 1080p60/59.94/50/30/29.97/25/24/23.98
  • 1080psf30/29.97/25/24/23.98
  • 1080i60/59.94/50
  • 720p60/59.94/50
  • 480p59.94/576p50 (via HDMI ports only)
  • 480i(NTSC)/576i(PAL)

Wireless

  • Up to 1000ft line of sight
  • Non-DFS Frequencies:
  • US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
  • EU & JP: 5.19 ~ 5.23 GHz
  • DFS Frequencies:
  • US: 5.27 ~ 5.55 GHz and 5.67 GHz
  • EU & JP: 5.27 ~ 5.67 GHz

RF Power

  • 19dbm EIRP(with two 5dbi TX antennas)

Noise Rejection

  • Can coexist with WiFi and 5GHz cordless phones

Audio

  • Format Support: 48kHz 24-bit PCM

Physical

  • Dimensions: 0.95"x2.6"x4.47"(24mmx66mmx101.5mm)
  • Weight: 8oz(226g)
  • Operating temperature:
  • Milled Aluminum

Mountability

  • Multiple mounting options with 4-40 holes
  • Multiple mounting options with 1/4" hole

Power

  • 2-Pin Lemo 7-28 VDC
  • No Internal Battery
  • Consumption: 7.5 Watts
Bolt 1000 Receiver

Video Output

  • 1 x USB 3.0 micro B receptacle
  • 1 x 75 Ohm BNC
  • 1 x Type A receptacle HDMI

Video Delay (Tx to Rx)

  • <0.001sec (when no video format conversion is enabled)

Color Sampling

  • Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later); RGB 4:4:4 (HDMI out, 8-bit color)

Supported Resolutions

  • 1080p60/59.94/50/30/29.97/25/24/23.98
  • 1080psf30/29.97/25/24/23.98
  • 1080i60/59.94/50
  • 720p60/59.94/50
  • 480p59.94/576p50 (via HDMI ports only)
  • 480i(NTSC)/576i(PAL)

Wireless

  • Up to 1000ft line of sight
  • Non-DFS Frequencies:
  • US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
  • EU & JP: 5.19 ~ 5.23 GHz
  • DFS Frequencies:
  • US: 5.27 ~ 5.55 GHz and 5.67 GHz
  • EU & JP: 5.27 ~ 5.67 GHz

RF Power

  • 17dbm EIRP(with one 2dbi TX antenna)

Noise Rejection

  • Can coexist with WiFi and 5GHz cordless phones

Audio

  • Format Support: 48kHz 24-bit PCM 

Physical

  • Dimensions: 5.5” x 3.5” x 1.0”(139mm x 88.5mm x 25 mm)
  • Weight: 13.3oz(376g)

Mountability

  • Multiple mounting options with 4-40 holes
  • Multiple mounting options with 1/4" hole

Interfaces

  • OLED display with joystick navigation buttons

Power

  • 2-Pin Lemo 7-28 VDC
  • No Internal Battery
  • Consumption: 8.5 Watts

What's in the Box

  • 1x Teradek Protective Case waterproof with custom foam (12 in x 9 in x 4.5 in - 30.48cmx 22.86cm x 11.43 cm)
  • 5x Wireless Antennas (2dBi 2.4/5.8GHz) - For Rx
  • 2x Wireless Antennas (2dBi 2.4/5.8GHz) - For Tx
  • 1x 2-pin Lemo to PowerTap 18 inch Cable
  • 1x Hot Shoe Adapter (1/4"-20 inch)
  • 1x Lightstand Adapter (1/4"-20 inch)
  • 2x SDI (BNC to BNC) Cable 10 inch
  • 1x HDMI 18in Cable (Type A to Type A)
  • 1x USB 3.0 Cable A to Micro B (3.ft Length)
  • 1x PSU 2-Pin Lemo to 18W AC Adapter 6ft cable
  • 1-Year Warranty

 

 

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Free Shipping on All Orders in the Continental US

Free Advice and Tech Support before and after the sale

Live “Videoguys” available to help. Call us at 800-323-2325 or use Live Chat below

30-day Money Back Guarantee with no hassle returns and no restocking fees.