Teradek Bolt 500 3G-SDI Video Tx Only Front
Teradek Bolt 500 3G-SDI Video Tx Only Side 2
Teradek Bolt 500 3G-SDI Video Tx Only Side


Part # BOLT926

MFR Part # 10-0926

With highly refined software, new wireless radios, and a redesigned chassis, these new models are the most reliable and capable monitoring solutions we have ever built More
MSRP: $1590

Availability: In stock



With highly refined software, new wireless radios, and a redesigned chassis, these new models are the most reliable and capable monitoring solutions we have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable, manual frequency selection and USB 3.0 GRAB Engine are all included on these new models but with the following new features:

Longer Range

Transmit visually lossless
video up to 500ft
with no delay.

20MHz Channels

Use more than twice as many Bolts in one location or avoid interference like never before.

2 New DFS Channels

Operate interference-free
more often in the USA and Europe by making use of two newly introduced DFS channels.

20% Smaller Chassis

Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed.

Individual Identity

Easily identify which Bolt
TX and RX work together with removable colored top plates.

Rapid Reconnection

Reconnect times during a dropped link are now instantaneous once you move back into range.

Built-In HDMI to SDI Converter

Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device.

More Robust
Than Ever Before

Reach your Bolt’s full range
and potential right out of
the box with new software
that provides the most robust wireless link we’ve ever created.

Video Inputs

  • • 1 x 75 Ohm BNC

Video Outputs

  • • 1 x 75 Ohm BNC (Loop-out)

Sdi Ancillary Data Support

  • • Supports transmitting metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to:
  • • https://support.teradek.com/hc/en-us/articles/217446087

Usb30 Grab Engine Summary

  • • ~checkmark~

Inputoutput Summary

  • • 3G-SDI & HDMI

Color Sampling

  • • SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)

Tx Hdmi Sdi Converter Summary

  • • ~checkmark~

Latency Summary

  • • <0.001 seconds

Delay Tx To Rx

  • • <0.001sec (when no video format conversion is enabled)

Resolution Frame Rate Summary

  • • 1080p60

Supported Resolutions

  • • 1080p 23.98/24/25/29.97/30/50/59.94/60
  • • 1080psf23.98/24/25/29.97/30
  • • 1080i50/59.94/60
  • • 720p50/59.94/60
  • • 480p59.94/576p50 (via HDMI ports only)
  • • 480i(NTSC)/576i(PAL)

Video Compression

  • • visually lossless

Color Correction

  • • CDL/1024 1D LUT (supports 10-bit color)
  • • 33x33x33 3D LUT (supports 10-bit color)

Audio Compression

  • • 48kHz 24-bit PCM

Audio Input

  • • Embedded Audio Input

Size Tx Summary

  • • ~bold~24 x 66 x 102 mm


  • • 1"x2.6"x4.0"(24mmx66mmx102.1mm)

Weight Tx Rx Summary

  • • ~bold~217g / 299g


  • • 7.6oz(217g)


  • • Milled Aluminum(Chassis) and regulation-compliant PCB
  • • Plastic Cap


  • • None

Configuration Interfaces

  • • None


  • • On/Off and Reset Switch

Desktop App

  • • Feature-rich Bolt Manager Application for OSX & Windows

Usb Interface Functionality

  • • Upgrade via Mini-USB


  • • Non-DFS Frequencies:
  • • US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
  • • EU & JP: 5.19 ~ 5.23 GHz
  • • DFS Frequencies:
  • • US: 5.27 ~ 5.55 GHz and 5.67 GHz
  • • EU & JP: 5.27 ~ 5.67 GHz

Rf Channel Selection

  • • Auto only (NOT configurable)


  • • AES-128

Rf Power

  • • 17dBm EIRP

Range Summary

  • • ~bold~500 ft


  • • Up to 500ft line of sight

Multicast Summary

  • • Up to 4 RX

Unicast Multicast

  • • Unicast / Multicast

Noise Rejection

  • • Can coexist with WiFi and 5GHz cordless phones

Rapid Reconnect Summary

  • • ~checkmark~

Number Of20 Mhz Channels Summary

  • • 0

Number Of40 Mhz Channels Summary

  • • ~bold~11

Power Input

  • • 2-Pin Connector 7-28 VDC


  • • None

Nominal Power Consumption

  • • 7.3 Watts (Measured at 1080p60)

Operating Temperature

  • • 0 ~ 40 deg-C


  • • Multiple mounting options with 1/4" holes

Gen1 Sidekick Compatible Summary

  • • ~x~

Metadata Support Summary

  • • ~checkmark~

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Do you have any questions?

Ask a Videoguys adviser about this product. More

Our knowledgeable sales staff is available Mon-Fri, 9am – 5pm ET to help answer any questions you may have regarding system recommendations, compatibility, features and more. Call us at 800-323-2325

Free Tech Support

Shop with confidence with us here to help. More

Videoguys technicians are the best in the industry and are available Mon-Fri, 9am – 5pm ET to help you get your system up and running. We can even help you get in touch with the manufacturer’s Help Desk when needed. Call our tech directly at 516-759-1611

Satisfaction Guaranteed!

30-day money-back or exchange on all purchases. More

We have FREE Tech Support and a 30-day money-back guarantee on all products we sell. If we can't help you get your video editing and production purchase working, you can return it for a refund or we can exchange it for a replacement or apply the value of the product you returned toward the purchase of a different product. If you choose to exchange your purchase, we give you a fresh 30 days to make it work!