SmallHD 1703 P3 Full HD 17-inch Reference Monitor
SmallHD 1703 P3 Full HD 17-inch Reference Monitor 1
SmallHD 1703 P3 Full HD 17-inch Reference Monitor 2
SmallHD 1703 P3 Full HD 17-inch Reference Monitor 3
SmallHD 1703 P3 Full HD 17-inch Reference Monitor 4
SmallHD 1703 P3 Full HD 17-inch Reference Monitor 5

SmallHD

Part # MON1703P3

MFR Part # MON-1703-P3

Full HD 17-inch Wide Color Gamut (P3) Reference Grade Monitor More
MSRP: $3499

Availability: In stock

$3,499.00

Full HD 17-inch Wide Color Gamut (P3) Reference Grade Monitor

Input: 2x SDI, HDMI
Output: 
2x SDI, HDMI 
Display: 
17-inch, 1920x1080, 450nits

The world's most rugged 17" monitor with astounding color accuracy. This monitor is perfectly engineered for production and post-production use.

Physical Features

  • Durability
  • Rugged milled aluminum housing
  • VESA mounting
  • 3/8” & 1/4” mounting points
  • Power options
  • V-Mount, Ggold Mount, AC power
  • LEMO
  • Rapid Rail
  • Quickly attach wireless devices & accessories
  • Table to C-stand

PageBuilder OS
All SmallHD on-camera monitors are equipped with the powerful and easy-to-use PageBuilder operating system.

Reference Grade Cinema Color
Each 1703-P3 monitor comes precalibrated for DCI-P3 mastering, Covering 100% DCI-P3 with a Delta E average of 0.5. Easily install your own 3D LUT calibration with advanced color management solutions like Light Illusion's, LightSpace CMS, or SpectraCal's CalMAN. Load any 3D LUT via SD card using SmallHD’s ColorFlow 3D LUT engine. 

Software That Eliminates Hardware
Pagebuilder OS enables you to send your video signal downstream via the Output Preview page. Any LUTs applied to the Output Preview page will also be mirrored downstream. Easily convert HDMI/SDI signals with Cross Conversion.

HD Scopes with Pixel Accurate Data Analysis
Display up to three, fully customizable Scopes on screen at a time. Utilize Color Picker to show raw pixel values from the displayed video.

Expose with Confidence
Exposure Assist supports both ARRI and Spectrum based false color, with built in IRE guides for reference. Utilize 2x Zebra to warn you when reaching a brightness level of your choosing. This is great for matching exposure across shots and cameras.

Dual View
Monitor two input sources simultaneously. You can apply LUT’s and tools to each source individually. Great for monitoring A/B cameras or pre and post LUT footage. You can also apply tools to each page individually.

Custom Focus Assist & Peaking Tools
Focus assist creates a bright highlight on in-focus subject matter; highly recommended when focusing on the fly. Focus Peaking increases the image sharpness allowing more detailed focusing. Change your color and intensity of your focus tools.

Versatile Image Framing
Select standard markers and safety areas that can be overlaid on the display as lines or matte overlays with custom opacity level and colors. Default aspect ratios include 4:3, 1.85, 2.39:1, 16:9 and Custom (user selectable).

 

 

Panel Type IPS LCD
Size Diagonal 17
Resolution 1920x1080
Pixel Density (PPI) 133 ppi
Aspect Ratio 16:9
Active Area 16.52
Brightness 450 Nits
Contrast 1500:1
Color Gamut 100% DCI-P3
Color Depth True 10 bit
Viewing Angle 179 degrees Vertical and Horizontal
Backlight Type White LED
Adjustable Backlight Yes - 0 - 100 in 6 steps with 100-nit studio mode
Temperature Adaptive Color No
Diopter Range  
Effective Viewing Distance  
Variable Field of View range
Height  
Width  
Depth  
Weight  
Construction Material  
3G-SDI YCC 4:2:2 @ 10-bits: 1080p60, 1080p59.94, 1080p50, 1080i60, 1080i59.94, 1080i50
HD-SDI YCC 4:2:2 @ 10-bits: 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98, 1080psf30, 1080psf29.97, 1080psf25, 1080psf24, 1080psf23.98, 1080i60, 1080i59.94, 1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98
SD-SDI YCC 4:2:2 @ 10-bits: 480i29.97, 576i25
HDMI YCC 4:2:2 @ 8 bits, 8/10/12 bit color in RGB & YCC 4:4:4: 1080p60, 1080p59.94, 1080p50, 1080p30, 1080p29.97 1080p25, 1080p24, 1080p23.98,1080i60, 1080i59.94, 1080i50, 1080i30, 1080i29.97, 1080i25, 720p120, 720p119.88, 720p100, 720p60, 720p59.94 , 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98, 480p120, 480p119.88, 480p60, 480p59.94, 576p100, 576p50, 480i240, 480i239.76, 480i120, 480i119.88, 480i60, 480i59.94, 480i30, 480i29.97, 480i24, 480i23.98, 576i200, 576i100, 576i50, 576i25
Component Not Supported
Composite Not Supported
Audio HDMI & SDI - Incoming Audio Stream is sent downstream via HDMI or SDI connection
SDI 2x 3G Inputs (BNC), 2x 3G Outputs (BNC)
HDMI 1x Input, 1x Output
Component Not Supported
Composite Not Supported
Audio 1x ⅛” Headphone Jack on Front of Monitor
Power In 1x AC Power Input - 3 Prong 90-260V, 1x XLR 4-pin Input 12-34VDC, 1x Lemo Output 12VDC @ 4A Max
Power Out 1x XLR 4­pin Input 12­-34VDC, 1x Lemo Output 12VDC @ 4A Max
USB 1x Front USB2, 2x Rear USB2
Primary Control Interface Joystick Navigation, Dedicated Back Button. Additional Dedicated buttons for: LUT Selection; Backlight Level; Input Switch; Settings Menu; Multi View; Page 1-4 Instant Selection; Tools Menu
Record/Capture Dedicated Capture Button on Front Bezel
User Defined Functions  
RF Wireless Remote / External Control  
USB Remote / External Control  
Storage SD Card for LUTs, Captured Images, Image Overlays, Firmware Upgrades, Profile Saving.
USB USB ports support storage devices for LUTs, Captured Images, Image Overlays, Profile Saving.
Wireless  
Wifi  
Connector Type Single XLR 4-pin 12-34V DC IN for Battery or Power Supply, 12V Lemo 2-pin OUT MAX 2A
Voltage AC: 100 - 240 VAC 50-60Hz DC: 12 - 34 VDC
Power Consumption 28W Typ
Battery Plate Included Optional V-Mount, Gold-Mount
Recommended Power Supply Included
Overload Protection Yes
Smart Battery Compliant  
Battery Types Gold-Mount, V-Mount with optional Battery Plate Accessory
Battery Chemistry  
Output Voltage (VDC) 12V @ 2A via 2-pin Locking LEMO Connector
Battery Capacity (mAh)  
Battery Charging Time (hours)  
Compliance FCC, IC, CE, RoHS
Operating Temperature 32F - 100F
Storage Temperature 0F - 104F
Screen Protection Optional Acrylic Screen Protector
Height 11.7" (29.72cm)
Width 17" (43.18cm)
Depth/Length 2.5" (6.35cm)
Weight (Item Only without battery) 12.0625lb (5.47kg)
Weight (Packaged) 16.86lb (7.65kg)
Mount Points Multiple ¼”-20 & ⅜”-16 Threads on Top, Bottom, Left & Right Sides. Cold Shoe Style Rails on Back of Monitor. Available Cheeseplate for Battery Bracket Mounting. Available Rapid Rail Mount interfaces with cold shoe slots for 2 additional ¼”-20 threads.
Note:  
Pixel Zoom (type) 2x & 4x Zoom with smooth pan via joystick
Frame Guides Yes: Preset Aspect Ratios & Customizable
DSLR Scale Canon 5DMkii & Canon 7D
Custom Scale Yes (Underscan Only)
Anamorphic De-Squeeze Yes: 1.33x, 1.5x, 1.66x, 2.0x
Image Rotate(Manual/Automatic) Yes - Automatic or Manual Control
Image Flip (Manual/Automatic) Yes - Automatic or Manual Control
Cross Conversion Yes: HDMI → SDI & SDI → HDMI
Focus Assist (Colors) Yes - User Adjustable Color Style and Intensity
Peaking Yes - User Adjustable Intensity
False Color Yes - Rainbow & Arri Style
Zebra Yes - Dual - User Configurable
Waveform Yes - Luma & RGB Style, Fully User Customizable w/ Region of Interest Highlighting
Vectorscope Yes
PIP  
RGB Parade Yes - Fully User Customizable
Histogram Yes - Luma & RGB Style
Horizon Indicator  
Image Capture Yes - With Dedicated Button
Dailies Recording/Playback  
Master Recording  
Wifi Streaming  
Custom LUTS Yes - Loadable as Looks on Pages or as Systemwide Color Calibration via the settings menu
LUT Creation  
LUT Downstream Yes - Available on SDI 1 or HDMI Out. Applied on Output Preview Page.
LUT Import via SD Card or USB Storage Device
Onion Skinning  
Image Overlay Yes with Opacity Slider and Blink Setting
Blue Only  
Firmware Compatible with 1300-1700-2400-3200 Firmware V1.4 and later
Audio Meters Yes ­ HDMI & SDI up to 8 channel

Ships With

  • 36" HDMI to HDMI cable
  • 1703 P3 Studio Monitor

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Do you have any questions?

Ask a Videoguys adviser about this product. More

Our knowledgeable sales staff is available Mon-Fri, 9am – 5pm ET to help answer any questions you may have regarding system recommendations, compatibility, features and more. Call us at 800-323-2325

Free Tech Support

Shop with confidence with us here to help. More

Videoguys technicians are the best in the industry and are available Mon-Fri, 9am – 5pm ET to help you get your system up and running. We can even help you get in touch with the manufacturer’s Help Desk when needed. Call our tech directly at 516-759-1611

Satisfaction Guaranteed!

30-day money-back or exchange on all purchases. More

We have FREE Tech Support and a 30-day money-back guarantee on all products we sell. If we can't help you get your video editing and production purchase working, you can return it for a refund or we can exchange it for a replacement or apply the value of the product you returned toward the purchase of a different product. If you choose to exchange your purchase, we give you a fresh 30 days to make it work!