Teradek

Product Name Price
Teradek Bolt Pro 3000 3G-SDI Transceiver Set
$9,490.00
SKU: BOLT985
MPN: 10-0985
MSRP: $9490
Teradek Bolt Pro 3000 3G-SDI Receiver
$4,390.00
SKU: BOLT987
MPN: 10-0987
MSRP: $4390
Teradek Bolt Pro 3000 3G-SDI Transmitter
$5,390.00
SKU: BOLT986
MPN: 10-0986
MSRP: $5390

With highly refined software, new wireless radios, and a redesigned chassis, these new models are the most reliable and capable monitoring solutions we have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable (1 Transmitter can multicast up to 4 Receivers), manual frequency selection and USB 3.0 GRAB Engine are all included on these new models but with the following new features:

Longer Range

Transmit visually lossless
video up to 3000ft
with no delay.

20MHz Channels

Use more than twice as many Bolts in one location or avoid interference like never before.

2 New DFS Channels

Operate interference-free
more often in the USA and Europe by making use of two newly introduced DFS channels.

20% Smaller Chassis

Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed.

Individual Identity

Easily identify which Bolt
TX and RX work together with removable colored top plates.

Rapid Reconnection

Reconnect times during a dropped link are now instantaneous once you move back into range.

Built-In HDMI to SDI Converter

Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device.

More Robust
Than Ever Before

Reach your Bolt’s full range
and potential right out of
the box with new software
that provides the most robust wireless link we’ve ever created.

More about the Bolt 3000

  • Latency: < 0.001 seconds
  • Range: 3000ft
  • Multicast: Up to 4 Rx
  • Size (TX): 24x66x102mm
  • Weight TX / RX: 238g / 380g
  • Input / Output: 3G-SDI & HDMI
  • Resolution / Frame Rate: 1080p60
  • TX HDMI / SDI Converter: YES
  • Number of 20 MHz DFS Channels*: 24
  • Number of 40 MHz DFS Channels**: 11
  • Rapid connect: YES
  • Gen 1 Sidekick Compatible: NO
  • Metadata support: YES
  • USB 3.0 Grab Engine: YES

* 20MHz channels cannot utilize interlaced, PSF, or 1080p60/50 at this time.

** Based on USA channels. Channel availability may vary by region.

Technical Specifications

Bolt 3000 Transmitter

Video Input

  • 1 x 75 Ohm BNC

Video Output

  • 1 x 75 Ohm BNC(Loop-out)

Video Delay (Tx to Rx)

  • <0.001sec (when no video format conversion is enabled)

Color Sampling

  • Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later); RGB 4:4:4 (HDMI out, 8-bit color)

Supported Resolutions

  • 1080p60/59.94/50/30/29.97/25/24/23.98
  • 1080psf30/29.97/25/24/23.98
  • 1080i60/59.94/50
  • 720p60/59.94/50
  • 480p59.94/576p50 (via HDMI ports only)
  • 480i(NTSC)/576i(PAL)

Wireless

  • Up to 3000ft line of sight
  • Non-DFS Frequencies:
  • US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
  • EU & JP: 5.19 ~ 5.23 GHz
  • DFS Frequencies:
  • US: 5.27 ~ 5.55 GHz and 5.67 GHz
  • EU & JP: 5.27 ~ 5.67 GHz

RF Power

  • 22dbm EIRP(with two 5dbi TX antennas)

Noise Rejection

  • Can coexist with WiFi and 5GHz cordless phones

Audio

  • Format Support: 48kHz 24-bit PCM /li>

Physical

  • Dimensions: 0.95"x2.6"x4.47"(24mmx66mmx101.5mm)
  • Weight: 8oz(226g)
  • Operating temperature:
  • Milled Aluminum

Mountability

  • Multiple mounting options with 4-40 holes
  • Multiple mounting options with 1/4" hole

Power

  • 2-Pin Lemo 7-28 VDC
  • No Internal Battery
  • Consumption: 7.5 Watts
Bolt 3000 Receiver

Video Output

  • 1 x USB 3.0 micro B receptacle
  • 1 x 75 Ohm BNC

Video Delay (Tx to Rx)

  • <0.001sec (when no video format conversion is enabled)

Color Sampling

  • Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later); RGB 4:4:4 (HDMI out, 8-bit color)

Supported Resolutions

  • 1080p60/59.94/50/30/29.97/25/24/23.98
  • 1080psf30/29.97/25/24/23.98
  • 1080i60/59.94/50
  • 720p60/59.94/50
  • 480p59.94/576p50 (via HDMI ports only)
  • 480i(NTSC)/576i(PAL)

Wireless

  • Up to 3000ft line of sight
  • Non-DFS Frequencies:
  • US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
  • EU & JP: 5.19 ~ 5.23 GHz
  • DFS Frequencies:
  • US: 5.27 ~ 5.55 GHz and 5.67 GHz
  • EU & JP: 5.27 ~ 5.67 GHz

RF Power

  • 17dbm EIRP(with one 2dbi TX antenna)

Noise Rejection

  • Can coexist with WiFi and 5GHz cordless phones

Audio

  • Format Support: 48kHz 24-bit PCM /li>

Physical

  • Dimensions: 5.5” x 3.5” x 1.0”(139mm x 88.5mm x 25 mm)
  • Weight: 13.3oz(376g)

Mountability

  • Multiple mounting options with 4-40 holes
  • Multiple mounting options with 1/4" hole

Interfaces

  • OLED display with joystick navigation buttons

Power

  • 2-Pin Lemo 7-28 VDC
  • No Internal Battery
  • Consumption: 8.5 Watts
 

What's in the Box

  • 1x Teradek Protective Case waterproof with custom foam (12 in x 9 in x 4.5 in - 30.48cmx 22.86cm x 11.43 cm)
  • 5x Wireless Antennas (2dBi 2.4/5.8GHz) - For Rx
  • 2x Wireless Antennas (2dBi 2.4/5.8GHz) - For Tx
  • 1x 2-pin Lemo to PowerTap 18 inch Cable
  • 1x Hot Shoe Adapter (1/4"-20 inch)
  • 1x Lightstand Adapter (1/4"-20 inch)
  • 2x SDI (BNC to BNC) Cable 10 inch
  • 1x HDMI 18in Cable (Type A to Type A)
  • 1x USB 3.0 Cable A to Micro B (3.ft Length)
  • 1x PSU 2-Pin Lemo to 18W AC Adapter 6ft cable
  • 1-Year Warranty

 

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Free Shipping on All Orders in the Continental US

Free Advice and Tech Support before and after the sale

Live “Videoguys” available to help. Call us at 800-323-2325 or use Live Chat below

30-day Money Back Guarantee with no hassle returns and no restocking fees.