- Max payload of 8 pounds (3.6kg)
- Angled arm for unobstructed view of the camera's screen
- Advanced image stabilization
- iOS and Android app
- Carbon fiber handle
- Full 360 degree movements on all three axis
- Compatible with Manfrotto 501PL series mounting plates
- Battery holder is compatible with Qualcomm Quick Charge 3.0
- OLED display screen
Obtain smooth cinematic footage with the Ikan PIVOT 3-Axis Handheld Gimbal Stabilizer. The PIVOT supports a wide range of DSLRs, mirrorless cameras, camcorders, and even compact cinema cameras weighing up to 8 pounds. The angled arm allows the camera to be held above the roll axis allowing an unobstructed view of the camera's screen. The pressure sensitive joystick gives precise control over the gimbal movements. Compatible with Manfrotto 501PL series mounting plates, filmmakers can easily get the shots they need.
Max 8 lbs Payload
The PIVOT can hold a maximum combined payload of 8 lbs, allowing you to use a wider range of camera and lens combinations and accessories.
The angled arm elevates the camera above the roll motor for an unobstructed view of the camera's screen.
Point & Lock
Quickly lock your camera into any position by manually holding it in any direction. After a couple of seconds, the camera will lock and hold its position.
Advanced Image Stabilization
Improved response speeds and torque allow for better image stabilization.
Manfrotto Mounting Plate Compatibility
Compatible with Manfrotto 501PL series mounting plates, you can easily switch from a gimbal to a compatible tripod.
Pressure Sensitive Joystick
The pressure sensitive joystick allows for better precision when controlling the gimbal.
OLED Status Display
A display screen located on the handle conveniently provides you with the battery life and current operating mode.
Using the gimbal app, you can set different time intervals to program the PIVOT to perform a time lapse.
Multiple Mounting Options
The PIVOT handle comes with two 1/4"-20 mounts that are perfect for mounting accessories such as a light, microphone, or monitor. A 3/8"-16 thread located on the bottom allows you to securely mount the PI+VOT to a tripod, jib, or dual handle support system.
|Battery Charge Time:||3 - 4 Hours|
|Battery Operating Time:||8 - 10 Hours|
|Battery Stand By Time:||Up to 20 Hours|
|Battery Type:||18650, 3.7V, 2600mAh, Li-Ion Batterie|
|Dimensions:||16 x 10 x 3 in.|
|Payload:||Up to 8 lbs (3.6kg)|
|Shipping Dimensions:||18 x 11 x 5 in.|
|Shipping Dimensions (Metric):||45.72 x 27.94 x 12.7 cm|
|Shipping Weight:||7 lbs|
|Shipping Weight (Metric):||3.2 kg|
|Weight :||4 lbs|
1 X Battery Cradle (Installed In Gimbal)
1 X Carrying Case
1 X Charging Adapter
1 X Flathead Screwdriver
1 X Micro USB Cable
1 X Mini Tripod
1 X Mounting Plate
1 X PIVOT Gimbal
3 X 18650 Batteries
Shop with Confidence
Live “Videoguys” available to help. Call us at 800-323-2325 or use Live Chat below