Harnessing the power and precision of PD Movie's popular lens control systems, the PDL-3CH-FIZ Remote Live 2 Compact 3 Channel Focus, Iris and Zoom Control Kit is perfect for traditional and stabilizing camera setups. The PDL-3CH-FIZ easily attaches to almost any rig: Simply install the precision motors onto a 15 or 19mm rod and firmly lock their drive gears into the gearing of your lens; their 0.8 pitch gears are compatible with most common cinema lenses. Then, attach the lens control modules to your mounting point of choice (less than 1" in diameter), and provide power using the D-tap to lemo adapter. After installing the hardware, easily assign the motors and the control to one of six individual channels (two of the six are set for the focus and zoom respectively) by simply tapping each unit's single button. Set calibration and adjust additional settings to your preference and in just a few minutes, your follow focus is ready for use. You now have precise control of the zoom, iris, and focus at your fingertips. Due to its compact size, the PDL-3CH-FIZ is a welcome inclusion to almost any camera rig, even those requiring lighter payloads.
The precise movement of the PD3-M motors follow every nuanced adjustment you make to your focus and zoom.
The PDL-3CH-FIZ can be installed quickly to most camera setups that incorporate mounting rods.
Control Multiple Motors
Both the Focus and Zoom controls can be set to operate numerous motors, perfect for setting up elaborate 3D and special effects rigs.
Lightweight yet Effective
While powerful enough to be used in traditional camera setups, the PDL-3CH-FiZ is perfect for lightweight applications such as gimbal and Steadicam operations.
Simple to Operate
A simple "one-button-per-channel" control makes calibration and changing settings a breeze.
|Channels:||6 Assignable Channels|
|Gear Pitch:||0.8 (40 teeth)|
|Noise:||< 28 db|
|Torque:||0.5 Nm Max|
|Motor:||German imported, high-precision brushless motor|
|Cable Length:||39", 19" (Tether) 27" (D-Tap)|
|Connection:||6-pin Lemo (Power and Tether)|
|Input Voltage:||6-pin 9-18V|
- 1x Control To Motor Cable
- 1x PD-DTAP-DUAL Cable
- 1x PD-TC-F Thumb Control
- 1x PD-TC-FZ 2 Channel Thumb Control
- 2x D-Tap To Lemo Power Cable
- 2x Lemo To Lemo Cables
- 3x 19mm To 15mm Bushings
- 3x PD3-M Motor
Shop with Confidence
Live “Videoguys” available to help. Call us at 800-323-2325 or use Live Chat below