Capture and combine audio, full HD video and SD video together with VGADVI Recorder.
VGADVI Recorder captures and combines audio, full HD video and SD video together. Quiet, portable, captures, scales, encodes, streams and records from DVI, HDMI, VGA, DisplayPort, S-Video, and composite sources.
VGADVI Recorder™ is a stand-alone appliance for recording and/or streaming video display and camera sources.
VGADVI Recorder captures an HD video source such as a computer monitor, RADAR display or ultrasound monitor as well as an SD video source such as a camera feed. VGADVI Recorder then records these inputs as two individual time-stamped streams or one picture-in-picture stream. The recorded content can also be streamed live to remote users’ browsers or media players.
VGADVI Recorder is easy to setup and use, works straight out of the box and does not require the use of a computer or any additional equipment. Simply power it on, plug in your sources and press the on-device button to start recording. A straightforward web interface is available for custom configuration.
- Capture from screens or cameras at Full HD resolution
- Stream while recording to direct clients or via CDNs
- Managed and controlled either locally or over a network
- Use it everywhere – it’s portable with no software to be installed
- Capture presentation camera, slides and voice simultaneously
- Supports VGA, DVI, HDMI™, Display Port, S-Video, composite and RGB component
VGADVI Recorder supports a wide range of streaming formats and protocols enabling it to stream video to media players on a wide range of platforms and web browsers using industry standard streaming formats including FLV, ASF, MJPEG and via TCP/UDP using RTSP.
Supports Multicast Streaming via UDP using RTP, MPEG-TS RTP, MPEG-TS and publishes to streaming servers (Content Delivery Networks) via RTMP and RTSP.
|Video Inputs||Connectors||(1) DVI / HDMI™1 / VGA1 / Component2 (1) S-Video / composite3 (NTSC/PAL)|
|Resolutions||VESA modes: 640×480 to 1920×1200; Custom resolutions|
|HD Video Format Options||RGB plus separate HSync and VSync signals; RGB plus CSYNC signal; RGB with Sync-on-Green synchronization; DVI single link.|
|EDID Support||EDIDs can be uploaded to the device|
|Audio Input||Connector||(1) ⅛” (3.5mm) stereo analog audio|
|Input Levels||Mic and line-in|
|Video Output (Splitter / Converter)||Connector||(1) DVI-I (pass-through)|
|Signals||Analog and Digital versions are always output with automatic D/A or A/D applied|
|Audio Output||Connector||(1) 3.5mm stereo audio|
|Video Encoding||Video Codec||H.264, MPEG-4, Motion JPEG|
|Video Bit Rates||configurable up to 10 Mb/sec|
|Key Frame Intervals||Programmable|
|Color Resolution||YUV 4:2:0|
|Frame Size||Configurable up to 1920×1200|
|Frame Rates4||30 fps @ 1920×1080p (or smaller), 25 fps @ 1920×1200|
|Audio Encoding||Audio Codec||Encoder||Bitrate||Sample Frequencies|
|AAC||32-192kbps||16 kHz, 22kHz, 44kHz|
|G.711||–||8kHz (a-Law) & 8kHz (μ-Law)|
|Network Interfaces||Connector||(1) 10/100 Ethernet RJ45 (PoE spec: IEEE 802.3af class 0)|
|Streams||FLV, ASF, and MJPEG over HTTP|
|RTSP over TCP/UDP|
|RTMP and RTSP for publishing to a streaming server or CDN|
|Multicast Streams||RTP, MPEG-TS and MPEG-TS/RTP over UDP|
|Network Discovery / Announce||UPnP, SAP|
|Video/Audio Recording and File Management||Internal Storage||32 GB (solid state)|
|Unlimited storage when configured with local or network attached storage, enabling 24/7 recording.|
|Automatically removes oldest recordings from internal storage as space is required.|
|File maintenance through admin interface (Web UI)|
|Local Storage||Automatic copy to local USB drives via two USB 2.0 ports|
|Network Storage||FTP server and FTP client capabilities(automatic and manual)|
|Playback and Recorded Formats||Download recorded videos (AVI, MPEG-TS or MOV) using the Web UI and playback through any compatible player.|
|Administration||Web UI for administration. Includes multiple user roles (admin, operator and viewer).|
|Included API for integration into existing environments (executed via HTTP or RS-232). RS-232 API integration requires a USB to RS-232 adapter (not included)|
|Time Synchronization||NTP, TIME (RFC 868), PTP v1 (IEEE-1588-2002 V1)|
|Product Dimensions||7.95″ × 4.13″ × 1.38″ (202 mm × 105 mm × 35 mm)|
|Product Weight||1.4 lb, 635 g|
|Country of Origin||Made in North America (Canada)|
1 Using DVI-I port, with the supplied adapter or cable
2 Requires component to VGA adapter (not included)
3 Using S-Video port with the supplied adapter
4 Results obtained running all DVI-I ports at specified resolution actual fps performance may vary with specific video content real-time scaling (especially to different aspect ratios) may result in decreased fps performance
Do you have any questions?
Ask a Videoguys adviser about this product. More
Free Tech Support
Shop with confidence with us here to help. More
30-day money-back or exchange on all purchases. More