VITEC Focus FS-H60 Portable HDMI Recorder with Loop-Through image 1
VITEC Focus FS-H60 Portable HDMI Recorder with Loop-Through
VITEC Focus FS-H60 Portable HDMI Recorder with Loop-Through
VITEC Focus FS-H60 Portable HDMI Recorder with Loop-Through
VITEC Focus FS-H60 Portable HDMI Recorder with Loop-Through

Vitec Video Innovations

Part #FSH60

MFR Part #14663

Designed for video professionals, Focus FS-H50/60/70 Portable Recorders pack a wealth of functionality into a sleek and durable package that is no bigger than a deck a cards and weighs only a bit more. More
MSRP: $995

Availability: In stock

$995.00

12 In Stock

Designed for video professionals, Focus FS-H50/60/70 Portable Recorders pack a wealth of functionality into a sleek and durable package that is no bigger than a deck a cards and weighs only a bit more. Focus FS-H50/60/70 simplifies acquisition workflow by recording low bit-rate H.264 clips, either concurrently with high resolution content recorded by a camera or independently. The proxy clips can be instantly streamed to mobile devices and uploaded to networks or video platforms for sharing and collaboration, without transcoding.

Compact Focus FS-H50/60/70 professional recorders offer a range of resolutions up to 1080p30 and bit-rates up to 8 Mb/s. The three models, Focus FS-H50, Focus FS-H60, and Focus FS-H70 include composite and analog audio inputs, a HDMI input and a HD/SD-SDI input, respectively.

The portable Focus FS-H50/60/70 can be attached to all professional camcorders as well as to video sources including DSLPs, switchers, POV cameras, broadcast streams and VTRs. It records up to 650 hours of content on a standard 32 GB SDHC card and supports industry standard wrappers such as Quicktime MOV, MP4 and AVC HD.

Clips may be transferred to video sharing web sites or mobile devices simply by inserting the SDHC media card into a computer. Content may be easily uploaded via Ethernet or Wi-Fi with an optional Ethernet LAN or Wi-Fi adapter, which also enables users to preview live video input, access/upload recorded clips, operate Focus FS-H50/60/70 controls and change settings.

To ease FS-H recorder management, VITEC designed FS-Remote software : an intuitive end user application to Detect, Control, Synchronise and Monitor one or several FS-H Recorders in one single view (for Mac or PC). For custom integration within your application, VITEC provides a HTTP API for control and clip/stream management upon request.

PRODUCT HIGHLIGHTS

  • A complete range of inputs; Composite (FS-H50), HDMI with loop-through (FS-H60), or SDI with loop-through (FS-H70)
  • Half D1 to 1080p30 recording (from 500kb/s to 8Mb/s) depending upon model
  • File compatibility with popular smartphones, tablets,  computers and NLEs
  • Synchronized recording and timecode burn-in (FS-H70) , pre-recording and live snapshot features (full frame capture of the video input)
  • Flexible camera-mount options including camera mount cradle
  • Optional Ethernet LAN or VITEC Wi-Fi Adapter enables live video input preview using HLS or RTSP streaming and remote control. Compatible with computers and iOS mobile devices (IPad/Iphone).
  • FS-Remote : Software application to Detect, Control, Synchronise and Monitor one or several FS-H Recorders in one single application (Mac or PC) – based on HTTP API

Specifcations:

  • Video Input: HDMI
  • Codec: H.264 (MOV/MP4/AVC HD)
  • Resolution: SD/HD
  • Meida: SDHC card
  • Live Preview, VOD, Remote Control: Remote Control (Wi-FI or LAN) 

Inputs/Outputs

What are the inputs of each FS-Hxx Recorder?
FS-H70 has an SDI input (BNC x1) which captures video and 2 embedded audio channel. This SDI input conforms to SPMTE259M (SDSDI)
and SMPTE292M (HD-SDI). It also complies with SMPTE RP188 for SDI timecode capture.
FS-H60 provides a HDMI input (HDMI Type A x1) which captures video and 2 embedded audio channel (uncompressed).
FS-H50 provides a composite video input (BNC x1) and a stereo analog line level input (RCA x2).

How can I connect the FS-Hxx to capture audio along with my video source?
FS-H70 and FS-H60 features embedded audio capture respectfully within the SDI and HDMI video signals. If your source does not
embed the audio, an external audio embedder could be used.
FS-H50 captures composite video and uses separate RCA connectors to capture the analog audio.
Below is shown a typical wiring/hook up schematic:

 

Which FS-Hxx Recorders have a video/audio loopthrough?
FS-H70 and FS-H60 provides respectively a SDI and HDMI loopthrough (Audio/Video).

Does the FS-Hxx Recorders support timecode?
All the units can record timecode.
FS-H70 can capture the timecode from the SDI input signal:
FS-H50 / FS-H60 / FS-H70 recorders can record a timecode generated by the unit. The timecode is saved in the MOV timecode track
or in the XML attached to each recorded clip (start TC). MP4 clips do not embed timecode tracks.
Below are the modes available:
- EXT TC (only on FS-H70): the timecode is captured from the RP188 timecode located in the SD/HD-SDI input stream.
- FREE RUN: the timecode runs continuously even if the unit is not in record. Timecode between clips is not continuous.
- REC RUN: timecode runs only when the unit is in record. Timecode between clips is continuous.
- CLOCK SET (not available on FS-H70): the starting timecode is equal to the internal time clock of the unit.
NOTE: For FREE RUN and REC RUN modes, the device stores the last TIMECODE value when turned off. When turned on, the
TIMECODE continues from this last saved value. It is possible to reset the TIMECODE value by changing of TIMECODE mode.

Can the FS-H70 capture the embedded SDI timecode?
Yes. FS-H70 complies to SMPTE RP188 for SDI timecode capture.

What are the supported input resolutions and frame rates supported for FS-Hxx?
Below are the supported resolutions for each models:

INPUT RESOLUTIONS FS-H50 FS-H60 FS-H70
1080 59.94p/50p   Yes  
1080 59.94i/50i/29.97p/30p/25p/23.976p/24p   Yes Yes
720 59.94p/60p/50p   Yes Yes
PAL/NTSC Yes Yes Yes

How can I verify the video input signal resolution and frame rate?
While in STOP mode, press and hold the OK button: the battery level will be displayed. Press OK again to display the video input resolution detected. In the FS-Hxx web interface, the video input resolution is displayed in the header.

FS-H60 shows “NO AUDIO” on the unit menu with some HDMI sources, why?
The “NO AUDIO” message is displayed when FS-H60 does not detect any audio embedded in the HDMI signal. If your camera or video source supports an audio signal, ensure that is a non-compressed format (such as Dolby, DTS, …).
FS-H60 supports PCM audio.

What is the purpose of the USB port?
The USB port is dedicated to the VITEC Wi-Fi adaptor only.
The LCD backlight is too bright, can I turn it off?
Yes. LCD and buttons backlight be adjusted in the Backlight menu or via the web interface.


Recording

What type of files can be recorded?
MOV, MP4 or TS (AVC HD) clips can be recorded.
A separate XML file and thumbnail is attached to each clip.

Where can I get some sample clips recorded with FS-Hxx?
Clips recorded at different profiles can be found here:
https://www.dropbox.com/sh/q3xwvlpm7mq5l9u/gqVhiAkeRf

What is the snapshot file type?
Snapshots are saved as JPEG files.

What are resolutions and bitrates of the recorded clips?
7 profiles are available ranging from 1080p30 8Mbit/s to 320x180 30 fps at 500kb/s.
Details of the profiles are documented in the user manual.

What is the maximum continuous record time?
In the table below, the maximum record times are listed using a 32GB SDHC card:

PROFILE RECORDING RESOLUTION BIT RATE DURATION
PREMIUM 1080p 8Mb/s 8 hours
HIGH 720p 5Mb/s 13 hours
MEDIUM 960x540 3Mb/s 22 hours
STANDARD SD 1.5Mb/s 44 hours
LIGHT 320x180 0.5Mb/s 130 hours

Can I record interlaced clips?
Yes. To record interlaced clips, AVCHD mode must be selected.
AVHD can record 1080i and PAL or NTSC clips.

Where is the timecode information saved?
The timecode is saved in the MOV timecode track or in the XML attached to each recorded clip (start TC). MP4 clips do not embed timecode tracks.

My recording is split into 4GB file segments, why?
FS-Hxx writes files to a FAT32 volume which allows a maximum file size of 4GB. When this file limit is reached for a clip (1 hour of recording in Premium – 1080p), FS-Hxx automatically closes the file and creates a new clip. When putting clips in a playlist or in an NLE, the combined clips will result in a perfectly continuous video (no frames are lost at clips boundaries).
Refer to the question below to know the duration of 4GB clip.

What is the video duration of a 4GB clip?
The clip duration is dependent of your profile. Please refer to the table below:

PROFILE RECORDING RESOLUTION DURATION
PREMIUM 1080p 1 hour
HIGH 720p 1H40
MEDIUM 960x540 2H45
STANDARD SD 5H30
LIGHT 320x180 16H15

Can the recorder be externally triggered?
Yes, the FS-Hxx can be triggered externally via Wi-Fi.
Additionally, FS-H70 can be controlled using an SDI embedded record trigger from the camera (supported cameras: Sony / Panasonic / ARRI) or by using the SDI timecode break.
The start/stop record mode can be set in the TRIGGER menu (onto the unit or using the web interface):
- NORMAL: Start/Stop recording can be triggered from the front panel REC button or via the web interface.
- EXTERNAL: FS-H70 receives Start and Stop record triggers from the ancillary data embedded in the SD/HD-SDI input stream. The SDI a source must support Start/Stop command from the ancillary data.
- TC BREAK: FS-H70 monitors embedded timecode in the SD/HD-SDI input stream. The recording will begin when the timecode is incrementing. When timecode stops, the recording stops.

Can I capture a snapshot while recording video or in stop mode?
Yes, hit the OK button (or the snapshot button in the web interface) and a snapshot will be saved.

How can I pause/resume a recording?
While recording, press long the REC button to pause a recording. To resume, press short the REC button. If STOP is needed after a resume, press long the OK button.

What happens when the battery is running low or if the video input signal is lost while in recording?
The clip will be closed and saved onto the SDHC card.
In case the battery is running too low, the unit will then power down automatically.

I would like to record a clip as soon as the video signal is connected and active? Is it possible?
Yes. On FS-H50 and FS-H60, such functionality is possible by selecting the AUTO mode in the RECORD CONTROL menu (this menu is not accessible through the web interface). On FS-H70, other trigger modes are available EXTERNAL TRIGGER / TC BREAK - please refer to the User Manual for more details.

 

Media

What type of media is supported on the FS-Hxx Recorders?
FS-Hxx can record onto an SDHC card.

What class of SDHC media card is recommended?
In practice, VITEC recommends a minimum class speed of 8.

What is the maximal capacity of SDHC cards available?
SDHC cards are available up to 32GB capacity.

What is the file format used on FS-Hxx Recorders?
FS-Hxx uses FAT32 file format. Maximum file size is 4GB.

Is it possible to know when the SDHC media card is reaching capacity?
Yes, using the web interface, the REC/STOP text in the header will turn RED if remaining free space onto the SDHC card is low (<300MB)

 

Web interface / Connectivity

What features are available with the web interface?
The web interface allows to:
- Start/stop/pause remotely a recording
- Preview the live video input signal
- Review the recorded clips stored onto the SDHC card
- Download the recorded clips locally onto your PC/Mac
- Set the recording profiles and system parameters

Can the FS-Hxx stream live video?
Yes. The live input video can be accessed in the live window of the web interface. Click the “Live” button to start the preview.
If one wants to preview the stream using an external player, the live video link can be found in the same page. Below links can be used too (IP_Address to be replaced by the FS-Hxx IP address:
For HLS : http://IP_Address/hls/preview.m3u8
For RTSP streams : rtsp://IP_Address/preview

The live preview won’t start, why?
First, verify that FS-Hxx does detect the input signal. In the web interface, a blue dot with the input resolution must be displayed. Instead, if “No signal” is displayed, verify the video input source and its connections to FS-Hxx.
Second, for PC users, verify that VLC plugin is installed. If not, it can be found here for download:
http://download.videolan.org/pub/videolan/vlc/2.0.5/
Restart your web browser after install.
For MAC and iOS users, note that RTSP streams cannot be displayed within the web interface but VLC player can be used to view the stream. HLS stream is optimized for such platform.

What is the main purpose of the stream?
The live stream is used for preview and confidence monitoring. It is a 480x360 at 30/25 frames per second allowing to be played back on a large number of devices: tablets/cellphones/Mac/PC.

Can you preview the recorded clips?
Yes. It is possible to preview and download recorded clips (and snapshots) in the “Recorded contents” page of the web interface.

The live video preview shows 5 to 10 seconds latency, how can I reduce it?
By default, the live preview uses the HTTP Live Streaming (HLS) protocol. This protocol offers a wide platform compatibility (iOS/Mac/Windows) and good quality of service but the latency is high.
In order to optimize the latency, switch to RTSP streaming protocol. However, in this mode, the live stream cannot be played back within the default web interface using iOS and Mac platforms. VLC player can be used externally.
To set an optimal latency using VLC (any platforms):
- Open VLC application and open the Preference settings in “Tools” menu
- Select “Input & Codecs” tab
- Set default caching policy to “Low Latency” or “Lowest Latency” depending on your network performances.
Note: For experienced users, more settings are available by showing “All” settings (Input/Codecs menu, Advanced parameters)

VLC settings

 

How can I connect to the FS-Hxx web interface?
By default, FS-Hxx network is configured in AdHoc mode: FS-Hxx creates a Wi-Fi network called FS-Hxx-XXXX. To connect to this network:
- Switch on the Wi-Fi on your PC / Mac or mobile device and search for the available networks.
- Select the network called FS-Hxx-XXXX to connect to it.

 

- Once connected to the network, type in your web browser the address http://10.0.0.1 to access the web interface.
- By default, the web interface has no login/password, just leave blank the login/password text box and click the Login button.

I cannot connect to my FS-Hxx in AdHoc mode (direct connection)?
It is possible that the Wi-FI channel used by FS-Hxx Wi-FI adaptor is busy. It is possible to switch of channel by doing the following:
Go to the “Network Settings” menu then switch the Wi-Fi channel number. On next reboot, the Wi-Fi channel used will be different.
Important: No client must be connected to the FS-Hxx otherwise che channel change will not be applied on next reboot.

How do you configure the Wi-Fi network settings?
Access the FS-Hxx web interface as indicated above and select the “System Preferences” page.
In the “Network Settings”, you can connect to an existing Wi-Fi network (protected or not) or change the network name of the AdHoc network created by the FS-Hxx unit. Aplly the changes with the “Save Changes” button.
Settings will be applied on next reboot.
If the unit is not properly configured and access to the unit is no longer possible, refer to the “I cannot connect to my FS-Hxx over Wi-Fi anymore. How can I reset the network configuration?” question below.

What are the default login and password for the web interface?
By default, login and password are empty. To access the web interface, just click the Login button.

Where can I find the IP address of my recorder?
You can find the IP address using the following shortcut: in STOP mode, press and hold the OK button: the battery level will be displayed. Press the OK button three times to display the IP address.
Network settings can be found under the NETWORK menu.

I cannot connect to my FS-Hxx over Wi-Fi anymore. How can I reset the network configuration?
To restore the default network configuration, access the NETWORK SETTING menu and select RESET TO DEFAULT. On next reboot, FS-Hxx-XXXX network will be available. Repeat steps from the “How can I connect to the FS-Hxx web interface?” question above to connect to a private network.

Using the USB to Ethernet adaptor, I would like to configure it in DHCP. How can I do that?
By default, the Ethernet is configured in static mode at the http://10.0.0.1 address. By accessing this address, it is possible to reconfigure the Ethernet settings within the “System Preferences”.
It is also possible to configure the Ethernet in DHCP mode onto the unit within the “Networks Settings” menu (“Reset to DHCP”).

I lost my credentials and cannot connect to the FS-Hxx web interface? How can I reset it?
Repeat the steps from the response above to reset your password. Note that your network configuration will also be reset.

 

Power

How to remove the battery (or keep battery from sliding out)?
The battery charging indicator doubles as a locking mechanism for the battery.
To lock the battery, move the switch to the down position (slide towards the battery)
To unlock the battery, move the switch to the up position (slide away from the battery)

 

How long does the battery last?
The battery will last approximately
- FS-H70: 3 hours with Wi-Fi ON, 5 hours without
- FS-H60: 5 hours with Wi-Fi ON, 8 hours without
- FS-H50: 6 hours with Wi-Fi ON, 9 hours without

What happens when the battery is running low?
When battery runs below 10%, a warning message is displayed on the unit. On the web interface, the battery icon will turn red. When the battery gets too low, FS-Hxx will stop the recording, save the clip and shut down the unit automatically.

How do you charge the battery and how much time does it take to charge?
To charge the battery, FS-Hxx unit must be powered off. While powered on and connected to DC, FS-Hxx will not discharge the battery at all.
A full battery charge takes about 3 hours.

How do you preserve the battery life?
The battery is a Lithium-Ion battery which does not require to be fully discharged to optimize its life. Store the battery in a temperate area to maximize the battery life and performance.

Can the unit be powered externally?
Yes. FS-Hxx can be powered from the supplied AC-DC power adaptor (including international plug kit) or by an external DC source.
FS-Hxx requires a DC voltage between 5V and 17V. The lowest power consumption is achieved with a +12V powers supply.

What is FS-Hxx power consumption?
FS-Hxx power consumption is as followed:
- FS-H50: 1.5W without Wi-Fi dongle, 2.4W with Wi-Fi
- FS-H60: 2W without Wi-Fi dongle, 2.9W with Wi-Fi
- FS-H70: 3.4W without Wi-Fi dongle, 4.3W with Wi-Fi

My camera/equipment has a Lemo 2 points or Hirose 4 points or D-Tap connector which allows to supply 12V voltage to an external equipment. Can I tap the power supply for powering FS-Hxx?
This is possible if the camera/equipment can provide a minimum of 0.5A.
Contact your sales representative to find the appropriate adaptor cable (no voltage conversion is required).
FS-Hxx features a 2.5mm DC Jack input.

How can I increase my recording time using the battery?
Here are some tips for maximum battery life / efficiency:
- If you are not using the web features, do not plug in the Wi-Fi USB adaptor.
Do not unplug the Wi-Fi adaptor while FS-Hxx is powered on.
- Reduce or turn off the LCD backlight
- Turn off the button backlight

My unit is losing date and time when I am not using it. Why?
The unit is featuring a supercapacitor to save the date and time.
Each time the unit is powered up for 30 minutes, the capacitor is fully charged and date/time are saved for about a week.
After those 6-7 days, if the unit is not powered up, the date and time is reset to default and must be reentered.
User can choose to receive a warning pop up message at boot up when the DATE/TIME is resetted.

Can I remove the pop up warning DATE/TIME message at boot up?
The warning message is displayed only when the DATE/TIME is resetted. To avoid the message, enter a correct DATE/TIME.
Still, if one still wants to avoid the pop up message, just access the DATE/TIME menu to remove the warning message.

 

Accessories

Can I purchase additional batteries? Are they compatible across the FS-Hxx models?
Yes, battery pack can be purchased separately. One battery is provided per unit. The battery is common to all units (FS-H70, FS-H60, FS-H50). Do not use any third party battery to prevent damage to your unit.

How can I mount the FS-Hxx onto a camera?
FS-Hxx is shipped with a removable cradle. The cradle features a standard 1/4“-20 screw hole which fits several mountings kit/adaptors available on the market.

Can I use a non VITEC Wi-Fi adaptor with FS-Hxx?
Only the VITEC Wi-Fi adaptor will work with FS-Hxx. The Wi-Fi adaptor is optimized for FS-Hxx in terms of performance and power consumption.

Which USB to Ethernet adaptors are compatible with my FS-Hxx?
Two references are currently compatible with the units:
- Sabrent USB2.0 to Network 10/100Mbps Ethernet Adaptor (black): NT-USBC
- Apple USB2.0 Ethernet Adaptor (White)

 

Tips and Tricks
How can I stream live my video over the internet? Or access my recorded clips over the internet.
FS-Hxx features a web interface and a streaming technology which is compliant with the internet.

1) A simple way to have the FS-Hxx unit accessible over the web is to route the public IP address of your internet modem (box
from the Internet provider) to the IP address of your FS-Hxx unit.
Using this cost effective and easy to implement configuration, only few users can access the live stream at the same time
however.

 

2) In order to target larger audience, it is necessary to use a Content Delivery Network. If your CDN supports HLS or RTSP
streaming as an input stream then no third party software is necessary.


3) To target a large audience and many type of streaming platform or servers, Wirecast Pro software form Teleastream could
be used. To use FS-Hxx as a live input source within Wirecast Pro (5.0 and above):
a. Ensure FS-Hxx is accessible from your computer and that preview is configured in HLS.
b. In the Live window view of FS-Hxx web interface, copy the LIVE video link

 

The live preview link is http://xxx.xxx.xxx.xxx/hls/preview.m3u8 where xxx.xxx.xxx.xxx is the IP address of the FS-Hxx unit.
You can confirm the LIVE preview is available by clinking the LIVE button within the web interface.

c. Open Wirecast Pro 5.0 or above.
d. Within Sources menu of Wirecast application, select “New Web Stream”
e. A new webstream is created and the following window appears:
i. Select HTTP protocol
ii. Select Live Stream
iii. Enter the URI : paste the copied link or typr in the web address. As described above, the live preview link is http://xxx.xxx.xxx.xxx/hls/preview.m3u8 where xxx.xxx.xxx.xxx is the IP address of the FS-Hxx unit.
iv. Click the connect button to connect to the stream and see the preview.
v. Finally, save the settings after having renamed the web stream.
f. FS-Hxx preview is now available within the application for broadcasting.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Do you have any questions?

Ask a Videoguys adviser about this product. More

Our knowledgeable sales staff is available Mon-Fri, 9am – 5pm ET to help answer any questions you may have regarding system recommendations, compatibility, features and more. Call us at 800-323-2325

Free Tech Support

Shop with confidence with us here to help. More

Videoguys technicians are the best in the industry and are available Mon-Fri, 9am – 5pm ET to help you get your system up and running. We can even help you get in touch with the manufacturer’s Help Desk when needed. Call our tech directly at 516-759-1611

Satisfaction Guaranteed!

30-day money-back or exchange on all purchases. More

We have FREE Tech Support and a 30-day money-back guarantee on all products we sell. If we can't help you get your video editing and production purchase working, you can return it for a refund or we can exchange it for a replacement or apply the value of the product you returned toward the purchase of a different product. If you choose to exchange your purchase, we give you a fresh 30 days to make it work!