Teradek Bolt Pro 3000 SDI Transmitter 10-0986

Teradek

Part #BOLT986

MFR Part #10-0986

Long Range, Bolt Pro 3000 Transmitter a la carte, with 3G-SDI Video Input More
MSRP: $5390

Availability: In stock

$5,390.00

With highly refined software, new wireless radios, and a redesigned chassis, these new models are the most reliable and capable monitoring solutions we have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable (1 Transmitter can multicast up to 4 Receivers), manual frequency selection and USB 3.0 GRAB Engine are all included on these new models but with the following new features:

Longer Range

Transmit visually lossless
video up to 3000ft
with no delay.

20MHz Channels

Use more than twice as many Bolts in one location or avoid interference like never before.

2 New DFS Channels

Operate interference-free
more often in the USA and Europe by making use of two newly introduced DFS channels.

20% Smaller Chassis

Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed.

Individual Identity

Easily identify which Bolt
TX and RX work together with removable colored top plates.

Rapid Reconnection

Reconnect times during a dropped link are now instantaneous once you move back into range.

Built-In HDMI to SDI Converter

Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device.

More Robust
Than Ever Before

Reach your Bolt’s full range
and potential right out of
the box with new software
that provides the most robust wireless link we’ve ever created.

Bolt 3000 Transmitter

Video Input

  • 1 x 75 Ohm BNC

Video Output

  • 1 x 75 Ohm BNC(Loop-out)

Video Delay (Tx to Rx)

  • <0.001sec (when no video format conversion is enabled)

Color Sampling

  • Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later); RGB 4:4:4 (HDMI out, 8-bit color)

Supported Resolutions

  • 1080p60/59.94/50/30/29.97/25/24/23.98
  • 1080psf30/29.97/25/24/23.98
  • 1080i60/59.94/50
  • 720p60/59.94/50
  • 480p59.94/576p50 (via HDMI ports only)
  • 480i(NTSC)/576i(PAL)

Wireless

  • Up to 3000ft line of sight
  • Non-DFS Frequencies:
  • US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
  • EU & JP: 5.19 ~ 5.23 GHz
  • DFS Frequencies:
  • US: 5.27 ~ 5.55 GHz and 5.67 GHz
  • EU & JP: 5.27 ~ 5.67 GHz

RF Power

  • 22dbm EIRP(with two 5dbi TX antennas)

Noise Rejection

  • Can coexist with WiFi and 5GHz cordless phones

Audio

  • Format Support: 48kHz 24-bit PCM /li>

Physical

  • Dimensions: 0.95"x2.6"x4.47"(24mmx66mmx101.5mm)
  • Weight: 8oz(226g)
  • Operating temperature:
  • Milled Aluminum

Mountability

  • Multiple mounting options with 4-40 holes
  • Multiple mounting options with 1/4" hole

Power

  • 2-Pin Lemo 7-28 VDC
  • No Internal Battery
  • Consumption: 7.5 Watts
   

What's in the Box

  • 1x Teradek Protective Case waterproof with custom foam (12 in x 9 in x 4.5 in - 30.48cmx 22.86cm x 11.43 cm) 
  • 2x Wireless Antennas (2dBi 2.4/5.8GHz) - For Tx 
  • 1x 2-pin Lemo to PowerTap 18 inch Cable 
  • 1x Hot Shoe Adapter (1/4"-20 inch) 
  • 1x Lightstand Adapter (1/4"-20 inch) 
  • 2x SDI (BNC to BNC) Cable 10 inch 
  • 1x HDMI 18in Cable (Type A to Type A) 
  • 1x USB 3.0 Cable A to Micro B (3.ft Length) 
  • 1x PSU 2-Pin Lemo to 18W AC Adapter 6ft cable 
  • 1-Year Warranty

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Do you have any questions?

Ask a Videoguys adviser about this product. More

Our knowledgeable sales staff is available Mon-Fri, 9am – 5pm ET to help answer any questions you may have regarding system recommendations, compatibility, features and more. Call us at 800-323-2325

Free Tech Support

Shop with confidence with us here to help. More

Videoguys technicians are the best in the industry and are available Mon-Fri, 9am – 5pm ET to help you get your system up and running. We can even help you get in touch with the manufacturer’s Help Desk when needed. Call our tech directly at 516-759-1611

Satisfaction Guaranteed!

30-day money-back or exchange on all purchases. More

We have FREE Tech Support and a 30-day money-back guarantee on all products we sell. If we can't help you get your video editing and production purchase working, you can return it for a refund or we can exchange it for a replacement or apply the value of the product you returned toward the purchase of a different product. If you choose to exchange your purchase, we give you a fresh 30 days to make it work!