Teradek Beam RX AB Mount
Teradek Beam RX AB Mount side views

Teradek

Part #BEAM579

MFR Part #10-0579

1 Beam Rx Receiver with 3G-SDI Output with Anton Bauer (AB) Gold-mount battery plate. Includes a dedicated bidirectional IFB channel More
MSRP: $2790

Availability: Out of stock

$2,790.00

The Teradek Beam is a full HD camera-back H.264 encoder, capable of delivering stunning video at bit rates up to 30Mbps.* Beam operates on the unlicensed 5GHz band and can transmit up to 2500ft with just 2 frames of latency. Whether the job requires a wireless link back to the OB Van or an MPEG-TS stream back to the station, Beam gives broadcasters unparalleled flexibility in the field.

Multicast Capable + IFB

Beam is multicast capable up to 4 receivers and includes a dedicated bidirectional IFB channel, which allows a news operations center to speak directly to the camera operator in the field.  

Camera Control

Beam offers a full duplex RS-422 port for remotely controlling your camera.

Protocol Support

Beam utilizes the RTSP and MPEG-TS protocols, allowing broadcasters to transmit video over the Internet to a Beam decoder or directly to computers at very high bit rates. The Beam decoder can also act as an RTSP server, which will re-stream your video feed directly to a local computer.

Functional Design

With a 3G-SDI input and your choice of AB- or V-mount battery plates, Beam seamlessly integrates with all popular professional cameras. The chassis also includes an OLED screen for quick configuration, LAN port for broadcasting over wired networks, and support for high power transmission on the 5.15 ~ 5.25GHz band.


Technical Specs

BEAM Specification    
Video Compression H.264 Baseline Profile Level 4.2 with de-interlacing  
System Latency 90 - 110 millisecond delay between Transmitter and Receiver  
Wireless range 2500ft +- 200ft  
Digital Video In/Out SD-SDI, HD-SDI, 3G-SDI  
Video Port TX: SDI input and looped Output, RX: SDI output  
Supported Video Resolutions SMPTE244 480i59.94 (NTSC), 480i60 (861-D)
  IEC61179-5 576i50 (PAL)
  SMPTE 296M 720p23.98, 720p24, 720p25, 720p29.97, 720p30, 720p50, 720p59.94, 720p60
  SMPTE 274M 1080i50, 1080i59.94, 1080i60, 1080PsF23.98,1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
SDI Compliance SMPTE 259M BI.656 SDTV Digital Signal/Data Serial Digital Interface
  SMPTE 292M BT.1120 1.5Gb/s Signal/Data Serial Digital Interface
  SMPTE 425M 3Gb/s Signal/Data Serial Digital Interface
  SMPTE 299M 16bit Digital Audio Format for SMPTE 292M
  SMPTE 352M Video Payload Identification for Digital Interfaces
Bitrate RTSP Server Up to 30Mbps
  MPEG2-TS Server Up to 15Mbps
Main Digital Audio In/Out TX/RX SDI embedded audio: 48kHz 16-bit stereo linear PCM
Main Analog Audio Out RX 48kHz 16-bit stereo linear PCM with mini stereo phone output jack
Talk-Back Analog Audio In/Out RX/TX 8kHz 16-bit stereo linear PCM with mini stereo phone input/output jack
Radio Power Aggregate Power: 150mW (22dBm), 50mW (17dBm)/antenna  
Radio standard IEEE 802.11a/n: OFDM  
Frequencies U-NII-1 (5.15-5.25 GHz), U-NII-3 (5.725-5.85 GHz)  
Antenna 3T x 3R MIMO, 3 antennas per WiMi6200TW/W1Mi6200RW  
Security 802.1x, 802,11i, WPA2, WPA and WEP 64/128 TKIP 128bit AES  
WPS Wireless Protected Setup for easy set up and security configuration  
Ethernet LAN 10/100 BASE-TX, RJ-45 jack  
Multicast WiFi: Up to 4 Receivers  
  LAN: No limit on number of receivers  
External Control Full duplex RS422 serial port  
USB Factory reset, IP configuration or firmware upgrade without PC  
Power Input/Consumption DC 7V-17V, 12 Watt  
Dimensions (H x W x D) (mm) 170 x 105 x 28 each board assembly (TX or RX)  
Weight (g) TX: 990g
RX: 610g
 
Operating Temperature 0 deg C to 50 deg C  

Comes with:
1 Beam Rx
1 AB Mount Plate
This comes with 1 Beam Rx with 3G-SDI Output and includes a dedicated bidirectional IFB channel.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Do you have any questions?

Ask a Videoguys adviser about this product. More

Our knowledgeable sales staff is available Mon-Fri, 9am – 5pm ET to help answer any questions you may have regarding system recommendations, compatibility, features and more. Call us at 800-323-2325

Free Tech Support

Shop with confidence with us here to help. More

Videoguys technicians are the best in the industry and are available Mon-Fri, 9am – 5pm ET to help you get your system up and running. We can even help you get in touch with the manufacturer’s Help Desk when needed. Call our tech directly at 516-759-1611

Satisfaction Guaranteed!

30-day money-back or exchange on all purchases. More

We have FREE Tech Support and a 30-day money-back guarantee on all products we sell. If we can't help you get your video editing and production purchase working, you can return it for a refund or we can exchange it for a replacement or apply the value of the product you returned toward the purchase of a different product. If you choose to exchange your purchase, we give you a fresh 30 days to make it work!