Marshall Electronics

Availability: Out of stock

Product Name Price
Marshall Dual 7" Modular Design Monitor only, no modules
$2,049.00
SKU: VMD702
MPN: V-MD702
MSRP: $2479
Marshall V-MD702 Pre-Loaded with two MD-3GSDI-A Modules
$2,469.00
SKU: VMD7023GSDI
MPN: V-MD702-3GSDI
MSRP: $2989
Marshall V-MD702 Pre-Loaded with two MD-HDSDIx2-A Modules
$2,589.00
SKU: VMD702HDSDIx2
MPN: V-MD702-HDSDIx2
MSRP: $3129

Marshall Electronics proudly presents the MD series of rack mount monitors that offer a flexible modular solution to system integration. These new rack-mountable monitors can be configured with a variety of video inputs that can be "swapped" or interchanged in the field based on your evolving needs and requirements. This eliminates the need to upgrade or replace equipment when a different input or application is required. This "future proof" solution provides flexibility and reassurance when necessary, especially in multi-monitor rack mount units.

The V-MD702 offers three 800 x 480 LED-backlit LCDs in one single configuration. along with excellent viewing angles. The V-MD702 includes Composite and Component loop-through, Status Display, False Color Filter, Markers, Freeze Function, Color Temperature Presets, RGB Gain / Bias Adjust, Pixel-to-Pixel, Blue Gun, Hard Tally, user-definable function buttons, and more. A variety of modules will become available including the availability of 3G/HD/SDI with loop-through, Fiber-Optic input/output modules, and more.

Marshall's new MD monitors integrate Telecast Fiber System's TeleCube™ Fiber-Optic HD/SDI transmission input/output modules. These new fiber modules deliver the industry's broadest range of digital rates while maintaining pristine signal quality that broadcasters and integrators demand.

Network Control

Each V-MD series rack includes a LAN port with a built-in web server. This allows the operator to visually monitor and control any or all V-MD series units that are connected to the LAN. Any function that is addressable from the front panel of a V-MD series monitor can be accessed via any Firefox® web browser -- even on a wireless device.** The rear panel LAN 100 port connects the unit to the LAN.

Once connected, the user simply locates the IP address of any one of the units connected to the LAN. This is accomplished by going to the MAIN MENU of any of the connected units and selecting the NETWORK CONFIGURATION submenu. This will then display the IP address of that unit. V-MD units are shipped with the DHCP mode enabled.

Simply type this IP address into the address bar of your browser and the home page for that unit will appear. It is possible to poll your LAN for all other MD units connected by accessing the NETWORK tab from the Top Menu.

The user can then control multiple networked MD monitors at once using a single browser page. The user may select which monitor(s) they wish to control and send commands to those particular monitors. The browser provides real-time status of any connected monitor, ensuring consistent signals / feeds and so forth.

Screenshot of Navigator and Tally Configurator Screen** A wireless hub must be part of the LAN to have this function.

False Color Filter

The False Color filter is used to aid in the setting of camera exposure. As the camera Iris is adjusted, elements of the image will change color based on the luminance or brightness values. This enables proper exposure to be achieved without the use of costly, complicated external test equipment.

To best utilize this feature, you must understand the color chart and have a basic understanding of camera exposure. Normally, when shooting subjects like people, it is common practice to set exposure of faces to the equivalent of approximately 56 IRE. The False Color filter will show this area as the color PINK on the monitor. Therefore, as you increase exposure (open the IRIS), your subject will change color as indicated on the chart: PINK, then GREY, then a few shades of YELLOW. Overexposed subjects (above 101 IRE) on the monitor will be shown as RED. In addition, underexposed subjects will show as DEEP-BLUE to DARK-BLUE, with clipped-blacks indicated with a FUCHSIA-like color. Lastly, the color GREEN is used to indicate elements of the image that are approximately 45 IRE. This represents a "neutral" or "mid-level" exposure commonly used for objects (not people).

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Do you have any questions?

Ask a Videoguys adviser about this product. More

Our knowledgeable sales staff is available Mon-Fri, 9am – 5pm ET to help answer any questions you may have regarding system recommendations, compatibility, features and more. Call us at 800-323-2325

Free Tech Support

Shop with confidence with us here to help. More

Videoguys technicians are the best in the industry and are available Mon-Fri, 9am – 5pm ET to help you get your system up and running. We can even help you get in touch with the manufacturer’s Help Desk when needed. Call our tech directly at 516-759-1611

Satisfaction Guaranteed!

30-day money-back or exchange on all purchases. More

We have FREE Tech Support and a 30-day money-back guarantee on all products we sell. If we can't help you get your video editing and production purchase working, you can return it for a refund or we can exchange it for a replacement or apply the value of the product you returned toward the purchase of a different product. If you choose to exchange your purchase, we give you a fresh 30 days to make it work!