iKan MS-PRO Dual Grip Handle Gimbal Kit

iKan

Part # MSPRODGHKIT

MFR Part # MS-PRO-DGH-KIT

MS-PRO-DGH-KIT The Beholder MS-PRO is designed specifically for professional filmmakers looking for a single handheld stabilizer for a large range of small cameras weighing up to 1.9 lbs. The Beholder MS-PRO is lightweight, easy to use, and can be c More
MSRP: $699.99

Availability: In stock

$699.99

MS-PRO-DGH-KIT

The Beholder MS-PRO is designed specifically for professional filmmakers looking for a single handheld stabilizer for a large range of small cameras weighing up to 1.9 lbs. The Beholder MS-PRO is lightweight, easy to use, and can be carried in your camera bag. In addition, the MS-PRO is versatile enough to be used with a GoPro or Smartphone.

360 Motor

The MS-PRO features a 360 degree rotating brushless motor on the yaw axis for less restricted movement.

Designed for Mirrorless Cameras

With a payload of up to 1.9 lbs., the MS-PRO has the ability to stabilize a wide range of today’s popular mirrorless cameras such as the Sony a6300, Sony a7SII, Panasonic GH5 and even cameras as small as a GoPro or smartphone. *Smartphone adapter not included.

Advanced Stabilization

Using a 32-bit controller with a 12-bit encoder, the MS-PRO uses an adaptive PID algorithm to produce a reliably efficient

handheld stabilizer. This means that the gimbal will respond faster, balance easier, and have a greater battery life.

 

Lock Mode

In Lock Mode, the Yaw, Pitch, and Roll axis work together to keep the camera pointed in one direction. The camera's composition will stay the same no matter how you move the handle.

Point & Lock

Quickly lock your camera into any position by manually pointing and holding it in any direction. After a few seconds, the camera will lock and hold its position until it is reset back to default.

Auto Inversion

Switch to Inverted Mode at any time by simply flipping the handle over the camera. Inverted Mode can be operated in conjunction with any of the Lock and Follow Modes.

 

Multiple Follow Modes

The MS-PRO features 3 different follow modes. In Yaw-Axis Follow Mode, the MS-PRO will only follow your pan movements. In Pitch and Yaw-Axis Follow mode, the MS-PRO will follow your pan and tilt movements. Finally, the 3-Axis Follow Mode gives you full control allowing you to pan, tilt, and roll.

Lock Mode

(Profile 1)

Lock Mode

Lock Mode will allow the camera to hold a certain direction, and will not follow, pan, or tilt.

Lock Mode

Pan-Follow Mode

(Profile 2)

Pan-Follow Mode

Pan-Follow Mode allows the gimbal to follow pan axis, and hold the tilt position.

Pan-Follow Mode

Follow Mode

(Profile 3)

Follow Mode

Follow Mode allows the camera to follow both tilt and pan directions.

Follow Mode

3-Axis Follow Mode

(Profile 4)

3-Axis Follow Mode

3-Axis Follow Mode has no restrictions as it allows the camera to follow pan, tilt, and roll.

3-Axis Follow Mode    

OLED Status Display

A display screen located on the back of the handle conveniently provides you with information on the battery life and operating mode.

Easy to Use

With a newly designed quick-release baseplate system, the MS-PRO is easy to balance without the need of any tools.

 

Multiple Mounting Options

The MS-PRO handle comes with two 1/4-20 mounts that are perfect for mounting accessories such as a light, microphone, or monitor. A 3/8-16 thread located on the bottom allows you to securely mount the MS-PRO to a tripod, jib, or dual handle support system such as the Ikan DGH.

 

 

 

 





Shipping Dimensions: 16 x 10 x 6 in.
Shipping Dimensions (Metric): 406 x 254 x 152 mm
Shipping Weight: 8 lbs
Shipping Weight (Metric): 3.6 kg
UPC Code: 847983021352

MS-PRO
1x Battery Cap With 3/8-16 Mount (Pre-Assembled)
1x Battery Holder
1x MS-PRO Gimbal Stabilizier
1x Instruction Manual
1x Micro USB AC Adapter
1x Quick Release Plate (Pre-Assembled)
3x 18650 Batteries
1x 1/4"-20 Camera Screw (Pre-Assembled)
DGH
1x 1/4"-20 D-Ring Screw (Pre-Assembled)
1x Gimbal Crossbar
2x Gimbal Crossbar Feet
2x Rubber Grip Handles
1 x 3/8"-16 to 1/4"-20 Adapter (Pre-Assembled)
4 x 1/4"-20 Flat 5/32 Socket Cap Screws
1x 5/32 Hex Key

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Do you have any questions?

Ask a Videoguys adviser about this product. More

Our knowledgeable sales staff is available Mon-Fri, 9am – 5pm ET to help answer any questions you may have regarding system recommendations, compatibility, features and more. Call us at 800-323-2325

Free Tech Support

Shop with confidence with us here to help. More

Videoguys technicians are the best in the industry and are available Mon-Fri, 9am – 5pm ET to help you get your system up and running. We can even help you get in touch with the manufacturer’s Help Desk when needed. Call our tech directly at 516-759-1611

Satisfaction Guaranteed!

30-day money-back or exchange on all purchases. More

We have FREE Tech Support and a 30-day money-back guarantee on all products we sell. If we can't help you get your video editing and production purchase working, you can return it for a refund or we can exchange it for a replacement or apply the value of the product you returned toward the purchase of a different product. If you choose to exchange your purchase, we give you a fresh 30 days to make it work!