The 4-Port PCI Express x4 eSATA RAID Controller from G-Technology is a PCI Express eSATA controller with hardware RAID capabilities. The card adds 4 eSATA ports to your computer, each capable of bus transfer speeds of 3Gb/s. It is port-multiplier aware and fully compatible with Windows and Mac OS X. The card is identical to the host card that ships with the G-SPEED eS.

• eSATA storage supports bus transfer rates of up to 300MB/sec
• Connect up to 4 eSATA devices using this card
• Hardware RAID controller supports RAID levels 0, 1, 5, 10, and JBOD
• Support for devices that require port multiplication

RAID Supported: RAID 0, 1, 5, 10, JBOD

Interface Protocol: eSATA

Host Connection Type: PCI Express x4

Data Transfer Rate: 300MB/s

Channels: 4x

Device Support: eSATA

Hot Swap Support: Yes

Connectors: 4x eSATA

Mac: Mac OS X

Windows: Windows 2000, XP, Vista

Hardware: PCI Express x4 slot

Power: Bus-powered

The G-Tech G-SPEED eS with the G-Tech PCIe x4 RAID controller can easily be configured as a RAID 0, 1, 5, 10 or as a JBOD. This flexibility enables the system to be tuned to the required level of performance and fault-tolerance necessary to support your application. G-SPEED eS can also be set up as a software RAID or JBOD when used with third party port multiplier aware eSATA host adapters.

G-Tech G-SPEED eS 3TB with PCIe card - $1,159.00

G-Tech G-SPEED eS 4TB with PCIe card - $1,299.00

G-Tech G-SPEED eS 6TB with PCIe card - $1,849.00

G-Tech G-SPEED eS 8TB with PCIe card - $2,199.00