The SGM-2X Professional Shotgun Microphone System is designed for both the Pro-Sound and Broadcast markets. The microphone comes with two barrels making it either an omni (8.11" long) or, by adding the extension barrel, a supercardioid (15.75" long). Either configuration provides a sensitive, low-noise, wide bandwidth signal through its' balanced, low-impedanced XLR output. The SGM-2X comes complete with a unique, integrated shock-mount with both camera shoe-mount and mic stand-mount and two foam windscreens. The microphone is powered by a single, not included, "AAA" battery (no Phanton Power), which lasts more than 250 hours.

SGM-2X with extension barrel features:
• An 8 1/8" omnidirectional barrel
• An extension barrel to make it a 15 3/4" supercardioid shotgun mic
• Low noise (-50db)
• Wide bandwidth (100Hz-18kHz)
• Balanced low impedance XLR output
• Switchable low-cut filter
• Integrated shockmount attaches to camera shoe or mic stand
• Includes two (2) foam windscreens

Technical Specs:
Frequency Response: 40-20,000Hz
Low-Cut Roll-Off:: 6dB/Octave @ 200Hz
Sensitivity: Super Cardioid -39dB re 1V/Pa
Sensitivity: Omni-directional -45dB re 1V/Pa
Impedance: 680 Ohms @ 1Khz
Max. SPL Input Level: 110dB
Signal to Noise Ratio: 70dB
Dynamic Range: 85dB
Battery Type: AAA (1.5V) - use alkaline battery
Battery Current: 0.2mA
Battery Life: 1000 Hours w/Alkaline Battery
Weight w/o Battery: Long + Short Barrel 6.5oz (185grams)
Weight w/o Battery: Short Barrel 3.9oz (110grams)
Dimensions: Long + Short Barrel.......16" (400mm) length
Dimensions: Long + Short Barrel.......0.83" (21mm) diameter
Dimensions: Short Barrel..............8.4" (212.5mm) length
Dimensions: Short Barrel..............0.83" (21mm) diameter
Output Type: 3-Pin XLR type
Supplied Accessories: Shock mount mic holder, 2-Windscreens

Purchase the SGM1X, 2X or 1000 between 11/1/11 and 12/31/11 and receive free, a heavy duty 3-pin

XLR male to XLR female balanced interconnect cable. Cable length is 3’.

click here for rebate coupon.