The HD10C2, AJA's second generation HD D/A converter, brings exciting new features. In addition to being a high-quality 10-bit HD converter, the HD10C2 is "dual-rate" and works with both HD-SDI and SDI inputs. For HD-SDI inputs, the HD10C2 outputs full bandwidth HD component or VGA-style RGBHV video. For SDI inputs, component or composite SD outputs are supported. When connected to a multi-format monitor like the Sony 20L5, the HD10C2 will automatically provide an image from almost any HD or SD input format. The HD10C2 also features 2 equalized HD-SDI outputs.

Features

• Low Cost, High Quality, 10-bit Dual Rate HD/SD D/A Conversion
• Full Bandwidth HD Analog RGB or YPbPr Output (HD input)
• Component/Composite SD Output (SD input)
• 2 Equalized Loop-Thru HD-SDI/SDI Outputs
• RGBHV VGA style HD output using supplied adapter
• HD Sync Selectable Between Bi-level and Tri-Level
• 4:3 Safe Area Graticule (HD)
• 5-18VDC Power
• External Dipswitch Configuration

Specifications

Formats

• HD: 1080i @ 50/59.94/60 Hz
• 1035i @ 50/50.94/60 Hz
• 1080psf @ 23.98/24/25/29.97/30 (displayed as Interlaced)
• 720p @ 59.94/60 Hz
• SD: 525 59.94Hz, 625 50Hz
• Automatic Configuration

Inputs

• HD-SDI or SDI SMPTE 259/292/296, 10-bit, BNC
• Input Equalization: 125 Meter 1694 Cable

Outputs

• HD: YPbPr, RGB (SMPTE-274)
• SD: YPbPr (SMPTE/N10, Beta® RGB, Y/C, NTSC/PAL)
• 13W3 wideband analog output connector (cable supplied)
• HD-SDI/SDI equalized loop-thru, 2 x BNC

Sync

• HD: Tri-level or Bi-level, H/V Drive
• SD: normal SD sync

Frequency Response

• HD: Y +0, -.5db to 30 MHz, C +/- .25db to 13 MHz
• SD: Y +/- .25db to 5.5 MHz, C +/- .25db to 2.5 MHz

User Controls

• External Dipswitch
• YPbPr/RGB
• Component/Composite (SD)
• SD Pedestal
• SD Blanking
• HD 4:3 Graticule
• SD NTSC/NTSC-J
• Sync on Video on/off

Power

• +5-18VDC Regulated, 4 Watts, Power Supply Required (sold separately)

Size

• 5.8" x 3.1" x 1" (147 x 79 x 25mm)